File Server Installation, 2023

Start the installation

• Double-click the installation program install.exe in the installation package.
• Confirm the installation if prompted by Windows.

Select the installation language

• The options are Finnish and English.
• However, the installation package solves the language of the installed program, for example directory structure and the names of library components.

Select Vertex Servers

Select Network Server

Accept the license agreement

Accept the data collection agreement

The program sends user information to Vertex Systems Oy during the use of the program.

• This data is used for verifying the software license (NetVID license).
• The data is also used for improving the software quality and user experience.
• This data contains but is not limited to IP address and certain unique identifiers for your system.

Version to be updated

This question will not appear, if a previous version of Vertex CAD program has not been installed on the server.

If the installation program asks for the version to be updated, select either of the following:

• Select New installation, if you wish to install a new program.
• Select Update from version, if you wish to update the previous main version of the program to a new main version. See Upgrade File Server Installation for help.

Select the installation path

• The default installer folder is C:\vx[..]_srv, but this must be changed.
  • [..] is an application, for example g4, bd, ed, etc.
• Click Browse to change the installation folder.

The program is installed in the shared folder on the server. The last folder in the path should be named according to the application. For example:

• \\SERVER\vertex\vxg4_srv (Vertex G4 Mechanical Engineering)
• \\SERVER\vertex\vxg4plant_srv (Vertex G4 Plant and Piping Design)
• \\SERVER\vertex\vxed_srv (Vertex ED Electrical Design)
• \\SERVER\vertex\vxbd_srv (Vertex BD Building Design)
• \\SERVER\vertex\InDpro_srv (Vertex InD Kitchen Design)
• \\SERVER\vertex\vxhd_srv (Vertex HD Hydraulics Design)
• \\SERVER\vertex\vxpi_srv (Vertex PI Piping and Instrumentation Design as an independent installation - usually it is an add-on option in Vertex G4 or Vertex G4 Plant)

Select the installation folder:

• Select the shared folder from the file server, for example:
  • \\SERVER\vertex\
• After that, type the main folder of the Vertex CAD application that the program initially suggested as the installation folder (vxg4_srv, vxbd_srv, vxed_srv, vxg4plant_srv, etc.)

Since you changed the installation path, the program prompts you to write down the installation path:

If you perform the server installation from a workstation, you receive the adjacent message

In this case, the registry entries related to the installation are made on the workstation, although all the files related to the file server are installed on the server.

• As a result of such installation, the upgrade of Vertex’s main version must be performed from the same workstation as it was installed.

We recommend to perform the server installation always on the server, if possible.

Select whether to use a license server

• Select No, if you use NetVID licenses.
• Select No, if you use HASP modules on workstations and a LICENSE.TXT protection file.
• Select Yes, if you use the License Server.

License Server is used- enter the License Server information

• Enter the name of the computer workings as the server.
• Accept the port number 2003.
  • This default port usually always works. It works, unless the port is in some other use.
  • The port number is chosen when the license service is installed (before installing this program).

License Server is not used

• If you are using a NetVID license, skip this step.
• Enter the location of the protection file LICENSE.TXT, if you use workstation-specific HASP protection modules. If necessary, you can later save the LICENSE.TXT file in the user folder of the Vertex installation on the file server, for example:
  • \\SERVER\vertex\vxg4_srv\user (Vertex G4 Mechanical Engineering)
  • \\SERVER\vertex\vxbd_srv\user (Vertex BD Building Design)
  • \\SERVER\vertex\vxed_srv\user (Vertex ED Electrical Design)
  • \\SERVER\vertex\vxg4plant_srv\user (Vertex G4 Plant and Piping Design)

You can also skip this step and copy the LICENSE.TXT file to the folder vx[..]_srv/user on the server after the installation.

Check the installation data

• Check the installation folder, the language of the software package, and the license server information (if a license server is used).
  
  

Enter the installation path of the program on the workstations

• The program suggests the following as the installation path on the workstations:
  C:\vx[..]\
  [..] describes the application.
• Accept it or enter another path.

Please note, that if the workstation already has a local Vertex installation in path C:\vx[..], enter a path that does not conflict with the existing installations.

An example of the folder path of a workstation license:

• C:\vxg4 (default folder of Vertex G4)
• D:\vertex\vxg4plant (Vertex G4 Plant on the D drive in the folder vertex\vxg4plant)
• C:\CAD\vxed (Vertex ED on the drive C in the folder CAD\vxed)
• C:\2900\vxbd (Vertex BD on the C drive in the folder 2900\vxbd)

The program shows the duration of the installation.

Installation done

• Confirm by clicking Finish.
• You will be instructed to install the client licenses.
  • If the license server is not used, you will be prompted to attach the protection modules in the ports on the workstations. The protection modules are not needed, if NetVID licenses are used.

Installation with the client.bat on the server

• On the workstation, run the client.bat in the server's installation folder.
• The client.bat command file is located in the Client_install folder of the Vertex CAD program, for example:
  • \\SERVER\vertex\vxg4_srv\Client_Install\client.bat
  • \\SERVER\vertex\vxbd_srv\Client_Install\client.bat
  • \\SERVER\vertex\vxed_srv\Client_Install\client.bat

The program asks you to confirm that you want to run the installation.

• You must have permissions to install the program in the folder defined by the installation program.

Installing the HASP driver

• If the license server is the licensing method, this question is not prompted.
• If you are using a HASP module, and this is the first time Vertex is installed on this computer, select Yes.
• If you are using a NetVID license, select No.

• If you are using a HASP module, and Vertex has been previously installed on the computer, select No.

  • The driver has already been installed earlier and you do not have to reinstall it.

• See the installation of the HASP driver in the section Protection Module on the page Licensing Methods of Vertex CAD Software.
  

Associating the Vertex files with this installation

• If the Vertex file extensions (.vxp, .vxm, .vxz) have already been associated to a Vertex software, the installation program asks if you would like to change the association to the software now being installed.
• If you are installing the latest version of the same software, select Yes.
• If you are using different Vertex applications (for example BD and G4), select the association according to the application you mainly use.

Installation done

• Confirm by clicking Finish.
• The program has created a shortcut icon on your desktop and an empty installation folder.
• Start the program by double-clicking the shortcut icon. The first start up will take some time as the the necessary files are copied from the server to the local installation folder.